SPECIFICATIONS:

•Advertise your specials, new services or cheer on your hometown sports team. This is guaranteed to increase sales and boost your bottom line.

•To program this sign you must have a laptop running windows XP (not provided by TSS) and you go out to the sign and open the hinged back cover (see next page) and plug the 9-pin female cable in to your laptop. Using the provided software you would make your custom messages and then disconnect the cable and close the back cover. Your sign will then begin to run the programed messages, its that simple.

•The computer does not need to be attached to the sign all the time. The only time you need to use the computer is when changing your message. A typical car wash owner will program his sign once a week or twice a month.

•Dimensions: Menu is 38” W x 72” H with a 18” ground clearance. LED programmable board is 38” W x 18" H. Total menu height with LED programmable board is 105” H.

•Construction:Baked enamel aluminum skin with mill finished foot pads and back, and St. St. hinge and hardware with a high impact plastic face. The programmable LED message center is made from steel with a powder coated finish.

•Voltage/Amperage: 120VAC / 15 AMP MAX.

•Mounting: Single aluminum 3" x 4" x .250" post mount.

LED message center specifications:

•Pixel pitch 10. High resolution with up to 3 lines per message.

•Viewing angle horizontal is 110 degrees and vertical is 60
degrees.

•Configuration: 1R (red).

•Voltage/Amperage: 120VAC / 15 AMP MAX.

•LED display area: 19" H x 37.5" W

•Controlling method : Computer to Asynchronous
System to LED display.

•You must provide your own laptop with Windows XP
operating system to program this sign.